Autodesk Inventor Integration

Owned by Mike Clark
Last updated: May 18, 2023 by Jordyn Hayden
1 min read

First Release: 2022.11

Last Update: 2023.3

With DesignCalcs' latest integration with Autodesk Inventor, 3D modeling is now easier than before.

For information about the latest release, see https://thinkcei.atlassian.net/l/cp/5JNZTGWx.

For information about the initial release, see https://thinkcei.atlassian.net/l/cp/8n3N9phD.

Watch the demo to learn how it works:

https://thinkcei.wistia.com/medias/osiz1p8y4k


Supported Components

At the moment, only the following components will be exported from a DesignCalcs vessel file to Autodesk Inventor:

The Autodesk Inventor version 2023, build 158 was used in testing.

  • Level 1 Heads: Hemispherical Heads, Torispherical Heads, ASME F&D, Ellipsoidal, Flat and Conical Heads

  • Level 1 Reducers: Conical Reducers

  • Shells

  • Level 2 Rated Flanges of all types (except blind)

  • Level 3 Blind Rated Flanges

Each component is treated as a part with the vessel being the assembly.