DesignCalcs 2024.4.0.7820 Release Notes

Build 2024.4.0.7820

Release status - May 7, 2024

 

To access the latest DesignCalcs installation file, click DesignCalcs Download.

During installation, if an issue occurs with the Sentinel Run-Time Environment Installer, cancel the install and go to Installing or Updating the Windows Driver for the Hasp License for steps on how to complete a sentinel hasp installation. Once this is completed, install DesignCalcs again.

 

For a quick demo of the updates listed below, watch the following video:

https://fast.wistia.com/embed/medias/rmqcvjxnd9.jsonp

New Features

  • The Konnect and Vessel Link export buttons have been added so users can export design files from DesignCalcs to Vessel Link or Konnect™, which are finite element analysis (FEA) design and analysis software from Paulin Research Group. DC-11398

  • The following updates have been made to the JSON export button:

    • Using the JSON export button, general improvements have been made for better exporting and importing from DesignCalcs to other CEI-owned software like Finglow and Paulin Research Group. FIN-624, CRTN-4635, DC-11351, DC-11592, DC-11920, DC-11907, DC-12127

    • General improvements have been made when exporting files using the JSON export button regarding the design conditions. DC-11696

    • General improvements have been made when exporting files using the JSON export button regarding heads. DC-11846

    • The JSON export button can now support custom flanges. DC-10714

    • The JSON export button can now support rated flanges. DC-10725

    • The JSON export button can now support studded outlets. DC-11494

    • The JSON export button can now support intermediate supports. DC-11241

    • The JSON export button can now support flange bolts and gaskets. DC-11153

    • The JSON export button can now support saddles. DC-10736

    • The JSON export button can now import shells and cones from other software into DesignCalcs. DC-11868, DC-11834, DC-11614

 

Issues Resolved

  • The report information assoicated with a fixed tubesheet design file has been updated to display the correct formulas. Previously, Steps 10 and 11 in the calculation displayed the incorrect decimal value as well as a missing multiplication symbol. DC-11459, DC-11938

Note: This defect only affected the information displayed in the report. The actual Pass/Fail analysis results generated by the software were not affected.

  • The system’s scaling properties have been updated to an enhanced mode for better visibility. Previously, the default setting caused display issues depending on a user’s personal resolution settings. DC-10687

 

Miscellaneous

When designing a head, the user can select the Ignore Appendix 1-4 Strength Penalty option in the MDMT/Misc tab. After selecting this option, a warning message is now displayed to inform users this action may not support ASME code requirements for heads. DC-11668