Tubesheet - General

Owned by Former user (Deleted)
Dec 11, 2015
1 min read

(Fixed, Floating, and U-Tube)

Description: The label given for the component. It will appear in the component pane, the report dialog, the summary pane, and at the top of the component report. This will default to the component type and component number. For example, the third nozzle for the vessel will start with a description of Nozzle 3.

Mark: A shorthand reference for the component. It will also appear in the component report. The default entry will be an abbreviation of the component type and the component number. For example, the second jacket shell for the vessel will start with a mark SJ2.

Qty: Indicates that the mathematics assume two fixed tubesheets are present with one at each end of the tube bundle. This field is only available to Fixed Tubesheet designs.

Exchanger Type: The selected option will limit the Floating configuration to those allowed in figure UHX-14.1 and it will affect the calculation of Pe. This field is only available for Floating Tubesheet designs.

Configuration: Select a configuration from the options presented. Floating Tubesheet designs will have stationary and floating configurations.