(Fixed, Floating, and U-Tube)

Shell Information

Several of these fields will be automatically completed based on the host shell information when the Shell Search is used. The content of those fields will be locked.

Description: The label given for the component.

Design Pressure (Ps):The shell side internal design pressure.

Design Pressure (Ps,vac.): The shell side external design pressure.

Static Head: The internal pressure (pressure on the concave side) resulting from the static head of the fluid. The user must determine this value and input it accordingly. It will be added to the Pressure input and the sum will be used in the internal pressure calculations for the component. This field will not be present when “Solve for Pressure” is selected.

Corrosion Allowance: Corrosion allowance on the inside of the component (concave side).

Temperature: The maximum mean metal design temperature for the tubesheet design loading cases.

Esw: Available for Fixed Tubesheet designs, this is the girth seam joint efficiency (longitudinal stress) for the shell.

Thickness: This value is in the new condition. For the component to pass, this value must be at least the sum of the thickness necessary for pressure and temperature, corrosion allowances, and forming allowances or under-tolerances. If the thickness necessary for pressure and temperature is less than the thickness required by UG-16, the nominal thickness must be at least the sum of the UG-16 thickness and the tolerances, etc. In some cases, under-tolerance is not considered (e.g., for nozzle reinforcement, the under-tolerance of the nozzle neck is ignored). When “Solve for Thickness” is selected, the software will determine the smallest standard size that passes. The user is able to manually edit this value.

Inside Diameter: The component diameter in the new condition.

Liquid Density: Refers to the shell side liquid. This is for information only.

Per UG-23(e), calculate using: Select whether to calculate the allowable primary plus secondary stress using 3xS or 2xSy. Caution: If 3xS is selected and the value of S is determined at 90% of Sy, the allowable primary plus secondary stress will be 2.7xSy.

Consider Effect of Different shell material/thickness adjacent to tubesheet: For Fixed Tubesheet designs, select this box if the shell has a different thickness or material adjacent to the tubesheet; this is the same as using a shell band near the tubesheet. This is only applicable for configurations where the shell is integral with the tubesheet (Configurations a, b,and c).

Shell Material

Material: A brief description of the component material. When the material selection dialog is used, the default description is based on settings on the Materials-Misc. tab under Tools > Defaults. For example, if the settings are for Spec and Type/Grade and the material is SA-516 Grade 70, this field will show SA-516 Gr. 70. If the settings are instead just for Spec, the field will show SA-516. The field may be edited by the user to say anything without breaking the relationship to the material database; while this flexibility can be very helpful, the user must take care to enter correct information.

Condition: A brief description of the component material. Similar to the "Material" field, the description will default a certain way based on settings on the Materials-Misc. tab under Tools > Defaults when the material selection is used. This field may be edited by the user without breaking the relationship to the material database. As with the “Material” field, the user must take care to enter correct information.

Density: The material density based on table PRD from Section II, Part D. For those materials that did not have a clear match in this table, every effort was made to assign conservative values. Manually editing this field will sever the connection to the material in the database as indicated by the "Unlisted Material" caption.

B-Table: The external pressure table assigned to the material in the allowable stress tables in Section II, Part D. The table is used to determine the external pressure strength of the component and also the longitudinal compressive strength. Selecting a Factor B table other than the one assigned to the material will sever the connection to the material in the database as indicated by the “Unlisted Material” caption.

Poisson: Poisson's ratio for the selected material.

(Tsm): The mean shell temperature along the shell length as expected during operation. It is generally not conservative to substitute the shell design temperature for Tsm.

(Ts'): The metal temperature of the shell at the tubesheet as expected during operation. It is usually not conservative to substitute the shell design temperature for Ts'. This value is only required for radial differential thermal expansion calculations.

Related articles

Page:

Tubesheet - Tube
Page:

Tubesheet - Tube to TS Joints
Page:

Tubesheet - Conditions
Page:

Tubesheet - Figures
Page:

Tubesheet - Why are some of my results showing as NC

Browser not supported