Finglow 3D - Vessel Wizard
Finglow 3D has the option to create an Item using a Vessel wizard, this will create a new Item ready for calculation with just a few clicks.
From the File menu select Vessel wizard or click the icon below on the toolbar.
The following screen will then be displayed, navigate to the location for the destination Finglow file, then enter a new description into the edit box. Then click the New item button.
The next screen allows the input of the required dimensional data and also the design data to allow an Internal Pressure and Nozzle reinforcing calculation to be performed.
The software will create a model that has 2 heads a shell and a nozzle with an attached flange.
NOTE: The Material selection will be applied to all components.
NOTE: The software will create a Horizontal Vessel with the datum on the right. This can be changed if required after the wizard has finished by clicking the button below on the toolbar.
Once the data has been input or the defaults accepted click the OK button and the following screen will be displayed.
From here simply click the Calculate all button from the toolbar
and then the Calculate & Output button to run all of the calculations and create output files ready for printing.