| Displays information about inspection results for each welder | |
|---|---|
 | Adjust the display of the inspection log. The results can be grouped by process, inspection type, and date. |
 | Click this button to remove the currently applied filter and display all fields for each result. |
Process: The process and type that was inspected.
Inspection Type: The inspection method used.
Date: The date of the inspection.
Job: The job the welder was working on at the time of the inspection. This field is optional and is used for tracking purposes only.
Inspection length: The total weld length inspected. The label for this field can be changed in the Inspection defaults found in Tools > Defaults > Welder.
Inspection defects: The weld length that failed the inspection. The label for this field can be changed in the Inspection defaults found in Tools > Defaults > Welder.
Percentage of Failure: This is calculated by dividing the "Inspection length" by the "Inspection defects" and multiplying the result by 100.
Related articles