Displays information about inspection results for each welder
	Adjust the display of the inspection log. The results can be grouped by process, inspection type, and date.
	Click this button to remove the currently applied filter and display all fields for each result.

Process: The process and type that was inspected.

Inspection Type: The inspection method used.

Date: The date of the inspection.

Job: The job the welder was working on at the time of the inspection. This field is optional and is used for tracking purposes only.

Inspection length: The total weld length inspected. The label for this field can be changed in the Inspection defaults found in Tools > Defaults > Welder.

Inspection defects: The weld length that failed the inspection. The label for this field can be changed in the Inspection defaults found in Tools > Defaults > Welder.

Percentage of Failure: This is calculated by dividing the "Inspection length" by the "Inspection defects" and multiplying the result by 100.

Related articles

Browser not supported