Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Finglow Pressure Vessel Software for ASME VIII Div.2

Version: December 2021

All modules incorporate the requirements of the 2021 edition of ASME VIII Division 2. In addition to minor enhancements the following modifications have been made:

  • Shells - Internal Pressure : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Shells - External Pressure : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Nozzles & Openings : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

Obround limit removed from Section 4.5.2.1.

  • Saddle & Ring Supports : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Local Loads on Cylinders : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Local Loads on Formed Heads : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Bolted Flanged Connections : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Bolted or Welded Flat Heads: Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Fixed Tubesheets : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Floating Tubesheets : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • U-TubeTubesheets : Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • External Loads on Vertical Vessels: Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • External Loads on Horizontal Vessels: Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • Cyclic Loading: Version 21.00.00

Added ability to calculate Yield strength as per Annex 3-D.1.

  • No labels