Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

General

Label for "WPQ No.": Replaces the WPQ No. designation throughout the program with the entered text.

Field value for "Deposited weld metal range qualified": When there is no limit to the welder’s deposited weld metal thickness, the range qualified can be set to display ‘Max to be Welded,’ ‘WPS Limits’ or ‘Unlimited’ on the WPQ.Treat GMAW and FCAW as the same process for ASME welder qualification: Because of the similarities between the two processes, ASME Section IX allows a welder to be qualified for both GMAW and FCAW processes when they qualify in one of the processes. Some companies prefer to keep the qualifications separate for quality control purposes. Clear this box to require a welder to qualify for each of these processes individually.

Common Weld Report - Additional Process and Type

Weld Process: Select the third weld process to be shown in the report.

Type: Select the type of weld to be shown in the report.

WPQ Expiration Exception Report

The Expiration Exception Report’s function is to notify the person running any WPQ reports of expired welders. The default behavior can be set to "Do nothing," or "Show exception report," or "Skip WPQ and show exception report."

Mechanical Test Label

The ASME Section IX Code suggested WPQ form, QW-484, contains a field with a prompt of "Mechanical tests conducted by." However, when qualifying a standard groove weld, many companies will choose to radiograph the groove joint instead of doing the bend tests and may want to document the name of the lab which performed the radiographic tests.

...

Always use "Mechanical/ Volumetric tests conducted by": - Selecting this option will allow the program to always use mechanical/ volumetric tests on both the input screen and the report regardless of whether bend or volumetric tests were used.

Welder Image

User Welder Image on WPQ Output: Select this box to display the welder's image on their WPQ.

...

Right Margin: Indicate how far from the right hand side of the WPQ document the welder's image will appear. 


...

Filter by label (Content by label)
showLabelsfalse
max5
spacesCKB
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel = "defaults" and label = "prowrite" and type = "page" and space = "CEIKB"
labelsprowrite tools defaults pw-d1 pw-s9 WPQ

Page Properties
hiddentrue


Related issues