Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

(QW-410.64) Thermal Processes used in fabrication: Select this box if Thermal Processes are to be used during fabrication.

QW-410.81) Tubes expanded prior to welding: Select this box if the tubes are expanded prior to welding.

Number of electrodes: For hardface and overlay welds, enter the number of electrodes.

...

Supplementary device used: For SAW overlay welds, select this box to indicate that a supplementary device was used to control the magnetic field acting on the weld puddle.

Bead Width: For SMAW, SAW, GMAW, FCAW, GTAW, and PAW welds, this field is used to track the bead width that can be used to determine heat input. 

The following fields are unique to PAW processes.

Melt-in to keyhole: Indicate whether the Melt-in or the keyhole technique was applied. Melt-in is a technique in which the intensity of the concentrated heat is adjusted so that a weld pass can be produced from filler metal added to the leading edge of the molten weld metal. In Keyhole welding, a concentrated heat source penetrates partially or completely through a work piece, forming a hole (keyhole) at the leading edge of the weld pool.

Orifice diameter: Enter the diameter of the plasma torch-arc constricting orifice.

Constricted arc type: For hardface and overlay processes, indicated the type of constricted arc used.


The following fields are unique to OFW processes.
Flame characteristics: Describe the characteristics of the flame.
Welding technique: Indicate the welding technique used for this test.
Tip size: Enter the size of the torch tip.
Torch type: Enter the type of torch.

Notes/Additional Filler Metal

...

Flux from recrushed slag: For SAW processes, indicate whether or not the flux was from recrushed slag.

The following fields are unique to PAW overlay or hardface processes.
Powdered metal -- Type: Enter the type of powdered metal used in this test.
Feed rate: Enter the feed rate of the powdered metal.
Particle size: Indicate the particle size of the powdered metal.

...


...

Filter by label (Content by label)
showLabelsfalse
max5
spacesCKB
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel = "pqr" and label = "pw-s9" and type = "page" and space = "CEIKB"
labelsprowrite pw-s9 wps

Page Properties
hiddentrue


Related issues