This section will appear as 2 sections typically. One for Actual Values and one for Range Qualified.
Automatic Welding Variables
There are typically no variable for a Weld Operator for Automatic welding.
Machine Welding Variables (QW-360)
...
Weld deposit thickness: Enter the deposited weld metal thickness.
Number of Layers > 2: Check this box if more than 2 layers were used. This option is the adjustment needed to take a WPQ from 2T to Unlimited.
Backing gas: Specify whether or not backing gas was used in the test.
...
GMAW/FCAW Transfer mode: For GMAW/FCAW processes, select the transfer mode.
Amperage: The amperage used for the test.
Preplaced filler metal used: For tube-to-tubesheet welds, indicate whether or not preplaced filler metal was used.
STUD Welding Variables
Welding Position: The relationship between the weld pool, joint, joint members, and weld heat source during welding. Select the position used when qualifying the weld.
...
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| Page Properties | |||
|---|---|---|---|
| |||
|