Versions Compared

Old Version 2

changes.mady.by.user Mike Clark

Saved on

compared with

New Version 3

changes.mady.by.user Mike Clark

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Last Updated: 20192020.63

Material Data

The material data available to other components is now included in the Rated Flange window.

  • A new material default has been added for rated flange for both metric and customary units. Just as the other material defaults, this is located on the Materials tab under Tools > Defaults. It works the same way as the materials default for the other components. This default replaces both the material group default and the original material default for rated flange.
  • SA-105 is the default when the software is shipped.
  • The materials default for rated flange only allows selection of materials that are included in one of the following ASME references: B16.5 2003, B16.5 2009, B16.5 2013, B16.5 2017, B16.47 1996, B16.47 2006, B16.47 2011, and B16.47 2017.
  • The material search in the rated flange form only allows selection of materials that are included in the current active reference: B16.5 2003, B16.5 2009, B16.5 2013, B16.5 2017,  B16B16.47 1996, B16.47 2006, B16.47 2011, or B16.47 2017.
  • Due to the material changes, designs patched from 2012.0 or an earlier version of DesignCalcs will not have a material set; in most cases the math can still run as the Material Group will still be set.

...