...
Konnect™ can now analyze and plot CAD models by location without an underlying beam model, which allows users to join and lock the model to the vessel and piping from X, Y, or Z coordinates or by elevation, north, east, west, or south coordinates. PRG-2540
Under Help, you can now click Check for Updates to verify that you are using the latest version of Paulin Research Group software or to receive additional updates. PRG-3002
...
In MatPRO, a warning message is now displayed when the hot allowable stress value is set to 0, prompting the user’s review. Previously, the software did not allow 0 to be set as the hot allowable stress value, which may cause have caused an inaccurate out-of-range analysis in accordance with ASME BPVC Section II, Part D. PRG-2987
...
In MatPRO, all material proprieties now display correct yield stress values. Previously, some properties from Table 2A, ASME Section II-, Part D 2023 displayed the wrong values. PRG-3156
In FEPipe, the Lookup Material Database button in the Bend Leg template now loads and displays the material database as expected. PRG-3209
Overturning moments for brick models in NozzlePRO are now accounted for and work as expected. Previously, when a user entered an overturning moment for skirts, the loads were not considered in the analysis. PRG-2885
When importing hillside nozzles from DesignCalcs or Finglow with Vessel Link, the models now display as they should in Paulin Research Group’s products. Previously, the orientation and geometry of the model would display incorrectly in some cases. PRG-3054
The Flange Calculator in FlangePRO now converts English units correctly. PRG-3211
PVPTPro (cloud version) now plots the uploaded model as expected. PRG-3155
In NozzlePRO, header loads for parent geometries without an attachment are now included in the analysis. PRG-2534